Table of Contents
Advertisement
CAMERA SETTINGS
A Sensitivity increase settings
(SENSE UP)
Press the MENU button.
1
MENU
2
Select "SENSE UP", and then tilt the
joystick lever to c.
The "SENSE UP" setting will flash.
·SENSE UP
SHUTTER
WHITE BALANCE
BLC
BACK
Tilt the joystick lever to j or l to select
3
the sensitivity, and then tilt it to d.
Available settings: OFF (Default setting), X2, X4, X8,
X16, X32
Select "BACK", and then tilt the joystick
4
lever to c to complete the setting.
Note: (For both "SENSE UP" and "SHUTTER" settings)
• The SENSE UP function will not operate when the camera
is being used in manual iris mode.
• The "SENSE UP" and "SHUTTER" settings cannot both be
used at the same time. If you set a speed for "SHUTTER",
then the "SENSE UP" setting will be automatically changed
to "OFF".
• If "DAY NIGHT" is set to "AUTO", the sensitivity up
(SENSE UP) function will only operate during
black-and-white monitoring. (VCC-9100P series only)
B Shutter speed setting (SHUTTER)
Select "SHUTER", and then tilt the joystick
1
lever to c.
The "SHUTTER" setting will flash.
SENSE UP
·SHUTTER
WHITE BALANCE
BLC
BACK
Tilt the joystick lever to j or l to select
2
the shutter speed, and then tilt it to d.
You can make the setting display change continuously
by tilting the joystick lever continuously.
Available settings: OFF, X1, X2, X4, X8, X16,
X32 (zoom ratio),
50, 120, 250, 500, 1000, 2000,
4000, 10000 (seconds)
Select "BACK", and then tilt the joystick
3
lever to c to complete the setting.
SYSTEM INFORMATION
LENS
·CAMERA
PAN/TILT PARAMETERS
AUTO MODE
PRIVACY MASK
END
:OFF
:OFF
:ATW
:OFF
:OFF
:OFF
:ATW
:OFF
C White balance settings
(WHITE BALANCE)
Setting automatic tracing white balance
Select "WHITE BALANCE", and then tilt the
1
joystick lever to c.
The "WHITE BALANCE" setting will flash.
SENSE UP
SHUTTER
·WHITE BALANCE
BLC
BACK
Select "ATW", and then tilt the joystick
2
lever to c.
Available settings: ATW, MWB
Select "BACK", and then tilt the joystick
3
lever to c to complete the setting.
Setting manual white balance (MWB)
1
Select "WHITE BALANCE", and then tilt the
joystick lever to c.
The "WHITE BALANCE" setting will flash.
Tilt the joystick lever to j or l to select
2
"MWB", and then tilt it to c.
The manual white balance setting screen will be
displayed.
MWB-R
MWB-B
·BACK
1
Select "MWB-R" or "MWB-B", and then tilt the
joystick lever to c.
The setting will flash.
2
Tilt the joystick lever to j or l to change the
setting, and then tilt it to d.
You can make the setting display change continuously
by tilting the joystick lever continuously.
Available settings: 000–255
3
Select "BACK", and then tilt the joystick
lever to c.
The display will return to the camera setting menu
screen.
- 26 -
(ATW)
:OFF
:OFF
:ATW
:OFF
:
064
:
064
English
Advertisement
Table of Contents
