D Automatic Pan Settings (Auto Pan) - Sanyo VCC-9000EBCP/EBSP Instruction Manual

AUTOMATIC MODE SETTINGS
D Automatic pan settings
(AUTO PAN)
Setting a new automatic panning mode
1
Select "AUTO PAN", and then tilt the
joystick lever to c.
The automatic panning setting screen will be displayed.
AUTO PAN No.
SET LEFT LIMIT
SET RIGHT LIMIT
PAN SPEED
RUN
·BACK
Setting an automatic panning mode
2
number
1
Select "AUTO PAN No.", and then tilt the joystick
lever to c.
The "AUTO PAN No." setting will flash.
2
Tilt the joystick lever to j or l to select the
automatic panning number, and then tilt it to d.
Available settings: 001–004
Setting the left edge
3
1
Select "SET LEFT LIMIT", and then tilt the joystick
lever to c.
The "CALL PRESET 1 TO CONFIRM ......" screen will
be displayed.
AUTO PAN No. :001
·SET LEFT LIMIT
SET RIGHT LIMIT
PAN SPEED : 180
RUN
BACK
CALL PRESET 1 TO
CONFIRM......
2
Tilt the joystick lever to the left to confirm.
3
After making the setting, press the "1" numeric
button, and then press the ENTER button.
Setting the right edge
4
1
Select "SET RIGHT LIMIT", and then tilt the
joystick lever to c.
The "CALL PRESET 1 TO CONFIRM ......" screen will
be displayed.
AUTO PAN No. :001
SET LEFT LIMIT
·SET RIGHT LIMIT
PAN SPEED : 180
RUN
BACK
CALL PRESET 1 TO
CONFIRM......
2
Tilt the joystick lever to the right to confirm.
3
After making the setting, press the "1" numeric
button, and then press the ENTER button.
English
:001
: 180
1
ENTER
1
ENTER
5 Setting the automatic panning speed
1
Select "PAN SPEED", and then tilt the joystick
lever to c.
The "PAN SPEED" setting will flash.
2
Tilt the joystick lever to j or l to select the
panning speed, and then tilt it to d.
Available settings:
Select "BACK", and then tilt the joystick
6
lever to c to complete the setting.
Starting automatic panning
1 Select "AUTO PAN", and then tilt the
joystick lever to c.
The automatic panning mode setting screen will be
displayed.
2 Select "AUTO PAN No.", and then tilt the
joystick lever to c.
The "AUTO PAN No." setting will flash.
Tilt the joystick lever to j or l to select an
3
automatic panning mode number to be
started, and then tilt it to d.
4 Select "RUN", and then tilt the joystick
lever to c.
Automatic panning will start.
To stop automatic panning, use the joystick lever of the
system controller.
NOTE: You can also start automatic panning using the PAN
and + buttons of the system controller.
Select "BACK", and then tilt the joystick
5
lever to c to complete the setting.
- 37 -
(slow) – seconds (fast)
ƒ ƒ „ … ˆ ˆ