Installing The Thermal Sensor; Removing The Power Switch - Dell OptiPlex XE2 Owner's Manual

Installing the Thermal Sensor

1. Secure the thermal sensor to the chassis.
2. Thread the thermal-sensor cable into the chassis clips.
3. Connect the thermal-sensor cable to the system board.
4. Install the cover.
5. Follow the procedures in

Removing the Power Switch

1. Follow the procedures in
2. Remove the:
a) cover
b) front bezel
c) optical drive
3. Disconnect the power-switch cable from the system board.
26
After Working Inside Your Computer .
Before Working Inside Your Computer .