Removing The Processor - Dell Precision Tower 7810 Owner's Manual

Removing the Processor

1. Follow the procedures in
2. Remove:
a. computer cover
b. optical drive (required only for the removal of CPU1).
c. heatsink assembly
3. To remove the processor:
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever
needs to be opened first and which lever closes first.
a. Press down on the first lever that holds the processor cover in place and release it sideways from
its retention hook [1].
b. Repeat step 'a' to release the second lever from its retention hook [2].
c. Lift up the lever from its retention hook [3].
d. Press down on the first lever [4].
e. Lift and remove the processor cover [5].
f. Lift the processor to remove it from the socket and place it in antistatic package [6].
NOTE: Damaging pins during removal of the processor can cause damage to the processor.
4. Repeat the above steps to remove the second processor (if available) from the computer.
To verify if your computer has dual processor slots, see the System Board components.
28
Before Working Inside Your Computer.