Cleaning and care
Fine filter
Cleaning intervals
Only clean the fine filter if Clean the
plinth filter which is located in front
of the heat exchanger appears in
the display.
^ To clear the display: Select OK.
Removing the fine filter
^ Switch the dryer off.
At the bottom left of the appliance:
^ Press the cover panel for the fine
filter.
The panel will open.
42
^ Pull the fine filter out by the handle.
^ Pull the handle out of the fine filter.
Cleaning the fine filter
^ Clean the fine filter thoroughly under
running water.
^ Then firmly squeeze the water out of
the fine filter.
,
The fine filter must not be
replaced in the dryer dripping wet.
This could cause a fault to occur.
^ Remove any fluff on the handle with a
damp cloth.