Miele TOUCHTRONIC T 8012 C Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. TOUCHTRONIC T 8012 C
  6. Operating and installation instructions

Miele TOUCHTRONIC T 8012 C Operating And Installation Instructions

Miele clothes dryer user manual
Hide thumbs Also See for TOUCHTRONIC T 8012 C:
Table of Contents

Advertisement

Quick Links

Operating and Installation
Instructions
Condenser Dryer
T 8012 C
T 8013 C
UV
To prevent accidents
and machine damage
read these instructions
before
installation or use.
M.-Nr. 06 881 320

Advertisement

Table of Contents
loading

Related Manuals for Miele TOUCHTRONIC T 8012 C

Summary of Contents for Miele TOUCHTRONIC T 8012 C

  • Page 1 Operating and Installation Instructions Condenser Dryer T 8012 C T 8013 C To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 06 881 320...

  • Page 2: Table Of Contents

    Contents IMPORTANT SAFETY INSTRUCTIONS ....... . . 3 Control panel ........... . . 5 Before loading the dryer .

  • Page 3: Important Safety Instructions

    WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances.

  • Page 4: Save These Instructions

    IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.

  • Page 5: Control Panel

    a e- "Programs" buttons For selecting a drying program. b "Options" buttons For selecting a drying option. c "Dryness" button For selecting the dryness level of the finished laundry. d "Status" display Shows the current cycle of the drying program. e "Buzzer"...

  • Page 6: Before Loading The Dryer

    Before loading the dryer The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions". ^ Before using for the first time, clean the drum with a cloth. Before drying, check fabric care labels for special drying instructions.

  • Page 7: Using The Dryer

    1. Turn on the dryer and load the laundry ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - do not push it shut.
  • Page 8 Using the dryer Program Normal Available drying options: Turbo, Gentle, Anti-crease Extra Dry Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. More Dry Uniform loads of cotton, e.g. sheets, underwear, socks. Normal Knitted cotton fabrics that may shrink, e.g.

  • Page 9: Select A Drying Option (If Needed)

    3. Select a drying option (if needed) ^ A drying option can be selected or deselected with each press of the button. Using the dryer OPTIONS Turbo Fast drying for sturdy fabrics with increased temperature and a reduced program length. Gentle For drying delicate fabrics slowly at a lower temperature.

  • Page 10: Select The Dryness Level

    Using the dryer 4. Select the dryness level The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^ Press the selection button until the desired indicator illuminates. In the "Wrinkle-free"...

  • Page 11: Start The Program

    6. Start the program ^ Press the "Start/Stop" button. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. Using the dryer 7. At the end of a program The "End/Anti-crease" indicator will light at the end of a program and the buzzer will sound if it was selected.

  • Page 12: Canceling Or Changing A Program

    Using the dryer Canceling or changing a program ^ Press and release the "Start/Stop" button to stop the drying program. To continue drying: ^ Select the new program by pressing the e or - button. ^ Select any desired options. ^ Select a dryness level (available in the "Normal"...

  • Page 13: Child Lock

    Child lock When activated, the child lock prevents the dryer from being operated by locking the control panel functions. The dryer can be turned on but not started. The "Child lock" indicator will flash. The door can be opened. To activate the child lock 1.

  • Page 14: Dryer Care

    Dryer care Cleaning the lint filter The lint filter must be cleaned after every program. ^ Open the door and remove the lint filter, 1, by gently lifting it upwards. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Remove the lint from the door frame lint filter with your fingers.

  • Page 15: Cleaning The Exterior And The Control Panel

    The lint filters can be rinsed with hot water if necessary. ^ Take the door lint filters out by turning the knob at the filter top. ^ Rinse all lint filters with hot water and dry thoroughly. The filters must be dry before being returned to the dryer.

  • Page 16: Emptying The Condensed Water Container

    Dryer care Emptying the condensed water container Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container, located in the upper left corner of the machine. The container holds approximately 1 gallon of water.

  • Page 17: Cleaning The Condenser

    Cleaning the condenser To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. ^ Clean the condenser every 6 months and when the "Filter/Vent"...
  • Page 18 Dryer care Rinsing the condenser ^ Rinse the condenser along the left side with warm water. ^ Rinse the condenser from the front with warm water. ^ Check the condenser for visible soiling. Rinse the condenser until clean. ^ Place the condenser lengthwise on a towel to air dry.

  • Page 19: Quick Guide

    Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", before using the dryer.
  • Page 20 Quick Guide 1.Turn on the dryer and load the laundry ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry into the drum. Make sure that there is enough space in the drum for clothes to tumble freely.
  • Page 21 4. Select the dryness level ^ Press the selection button until the desired indicator illuminates. Quick Guide 5. Select the buzzer (if desired) 6. Start the program ^ Press the "Start/Stop" button. 7. At the end of a program The "Anti-crease / End" indicator will light.
  • Page 22 Quick Guide Program Normal Available drying options Turbo, Gentle, Anti-crease Extra Dry For laundry to be folded and shelved immediately, e.g. jeans, towels. More Dry For uniform loads, e.g. sheets, underwear, socks. Normal For knitted items that may shrink, e.g. jersey material or lightweight cottons.

  • Page 23: Dryer Care

    (see illustration). ^ Flip down the bulb cover. ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate. ^ Flip up the light bulb cover and press it firmly until it clicks into place.

  • Page 24: Frequently Asked Questions

    Frequently asked questions What if the dryer will not run? Possible fault The "Start/Stop" button was not pressed. The circuit breaker tripped or the dryer is unplugged. The door is not closed. How do I prevent static cling? Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.
  • Page 25 What if the "Filter/Vent" fault indicator is lit? Possible fault The lint filter is clogged. The air supply in the room is insufficient. What if the program runs too long or stops? Possible fault The airflow is insufficient in the area of the dryer.

  • Page 26: After Sales Service

    Miele Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.

  • Page 27: Installation Instructions

    Installation Instructions To prevent accidents and machine damage read these instructions before installation or use.

  • Page 28: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. Be sure to observe local building codes. Before installation, disconnect the...

  • Page 29: Caring For The Environment

    Disposal of the packing materials The packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. To prevent suffocation, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.

  • Page 30: Washer / Dryer Stack

    Washer / Dryer Stack The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit is available from your Miele dealer or the Miele Technical Service Department.

  • Page 31: Electrical Connection

    GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.

  • Page 32: Installation

    Installation Front view a Power cord with plug b Condensed water container c Control panel d Door e Access panel to condenser f Four height adjustable feet g Optional drain hose: An alternative to using the condensed water container is to drain condensed water into a sink, standpipe or gully.

  • Page 33: Installation Site

    Rear view a Handle for transportation (arrows) b Air intake opening to cool the condenser c Power cord with plug d Condensate drain hose e Accessories for connection to a sink standpipe Installation site Do not install the dryer in an area where it can be blocked, e.g.

  • Page 34: Installation Beneath A Counter

    When the machine lid needs to be removed to reduce the height of the machine, a built-under spacer kit* is necessary. It must be installed by a Miele Service Technician. The cover plate of the built-under kit replaces the appliance lid and ensures electrical safety.

  • Page 35: Installation Tips

    Installation tips An airflow gap of " (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toe kick or thick piled carpets. Do not install the dryer next to a refrigerator.

  • Page 36: External Water Drain

    Maximum drain length..13 ft (4 m) If the hose is not long enough, an extension hose is available as an optional accessory from the Miele. Installing the drain hose Do not pull or kink the drain hose, it...
  • Page 37 Draining the condensed water into a sink ^ Secure the hose carefully, e.g. by tying the hose to the water tap, to avoid damage by overflowing water. ^ Use the curved guide to prevent the drain hose from becoming kinked (see Front view illustration).

  • Page 38: Installation Requirements Demanding A Non-Return Valve

    Installation Installation requirements demanding a non-return valve To prevent water from flowing back into the machine a non-return valve must be installed at the following installations: – Installation to a sink standpipe – Several installation possibilities where additionally another washer or dishwasher is connected to.
  • Page 39 1 Connector 2 Sink connecting nut 3 Hose clamp 4 Hose end 5 Non-return valve 6 Dryer drain hose ^ Install the connector 1 with the sink connecting nut 2 to the sink standpipe. Usually the sink connection nut is equipped with a washer.
  • Page 40 All rights reserved / 4906 M.-Nr. 06 881 320 / 00 en - US For the most updated manual check the Miele website.

This manual is also suitable for:

Touchtronic t 8013 c

Table of Contents