Brake Light Switch Adjustment; Bulb Replacement - Honda CG125 Fan Owner's Manual

64

Brake Light Switch Adjustment

(Refer to the Safety Precautions on page 41.)
Check the operation of the brake light switch (1) at the
right side behind the engine from time to time.
Adjustment is done by turning the adjusting nut (2).
Turn the nut in the direction (A) if the switch operates
too late and in direction (B) if the switch operates too
soon.
(1)
(B)
(A)
(2)
(1) Brake light switch
(2) Adjusting nut

Bulb Replacement

(Refer to the Safety Precautions on page 41.)
The light bulb becomes very hot while the light is ON,
and remains hot for a while after it is turned OFF.
Be sure to let it cool down before servicing.
Do not put finger prints on the headlight bulb, as they
may create hot spots on the bulb and cause it to
break.
Wear clean gloves while replacing the bulb.
If you touch the bulb with your bare hands, clean it
with a cloth moistened with alcohol to prevent its early
failure.
• Be sure to turn the ignition switch OFF when
replacing the bulb.
• Do not use bulbs other than those specified.
• After installing a new bulb, check that the light
operates properly.
Owner´s Manual