Cleaning - Honda CG125 Fan Owner's Manual

Owner´s Manual

CLEANING

Clean your motorcycle regularly to protect the surface
finishes and inspect for damage, wear, and oil
leakage.
Avoid cleaning products that are not specifically
designed for motorcycle or automobile surfaces. They
may contain harsh detergents or chemical solvents
that could damage the metal, paint, and plastic on
your motorcycle.
If your motorcycle is still warm from recent operation,
give the engine and exhaust system time to cool off.
We recommend avoiding the use of high pressure
water spray (typical in coin-operated car washes).
NOTICE
High pressure water (or air) can damage certain parts
of the motorcycle.
Washing the Motorcycle
1. Rinse the motorcycle thoroughly with cool water to
remove loose dirt.
2. Clean the motorcycle with a sponge or soft cloth
using cool water.
Avoid directing water to muffler outlet and electrical
parts.
3. Clean the plastic parts using a cloth or sponge
dampened with a solution of mild detergent and
water. Rub the soiled area gently rinsing it frequently
with fresh water.
Take care to keep chemical solvents off the
motorcycle. They will damage the plastic and
painted surfaces.
The inside of the headlight lens may be clouded
immediately after washing the motorcycle. Moisture
condensation inside the headlight lens will disappear
gradually by lighting the headlight in high beam. Run
the engine while keeping the headlight on.
4. After cleaning, rinse the motorcycle thoroughly with
plenty of clean water. Strong detergent residue can
corrode alloy parts.
5. Dry the motorcycle, start the engine, and let it run
for several minutes.
67