CHAPTeR 7: PART RePlACeMeNT gUiDe
7.9 loWeR CoNTRol boARD RePlACeMeNT
1) remove both side covers as outlined in Section 7.8.
2) remove the 2 screws holding the lower control board to the frame (Figure A).
3) Disconnect the 3 wire connections at the lower control board and remove the board (Figure B).
figURe b
figURe A
4) reverse Steps 1-3 to install a new lower control board. NOTE: Be sure to re-attach the 3 wire connections removed in Step 3 (Figure C).
5) test the bike for function as outlined in Section 7.14.
figURe C
32