Installation You must install and charge the battery before using the telephone. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (read the user’s manual for details).
Telephone base installation Install the telephone base as shown below. The telephone base is ready for tabletop use. If you want to change to wall mounting, read the user’s manual for details. . Plug the small end of the power adapter into the power jack on the bottom of the telephone base.
Charger installation Install the charger as shown below. IMPORTANT INFORMATION . Use only the power adapter(s) supplied with this product. To order a replacement power adapter, visit our website at 1 (800) 222-3111 . The power adapters are intended to be correctly oriented in a vertical or floor mount position.
Battery installation & charging Install the battery as shown on the next page. battery, the screen indicates the battery status (see table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the charger when not in use. The battery is fully charged after 6 hours of continuous charging.
Page 6
Battery installation & charging Plug the battery connector securely into the socket inside the handset battery compartment, matching the color-coded label. Insert the supplied battery with the label THIS SIDE UP facing up as indicated. Step 3 Charge the handset by placing it face up in the telephone base or charger.
Page 7
Quick reference guide - handset CHARGE indicator On when the handset is charging in the telephone base or charger. qCID/-VOLUME Press qCID to show caller ID history. Press to scroll down while in menus. While entering names or numbers, press to move the cursor to the left.
Quick reference guide - handset Main menu > Shows a highlighted item >DIRECTORY CALL LOG Main menu DIRECTORY CALL LOG RINGER VOLUME RINGER TONE KEY TONE LCD LANGUAGE SET DATE/TIME CLR VOICEMAIL HOME AREA CODE Using menus Menu Press MENU/ item, DIRECTORY.
Page 9
Quick reference guide - telephone base IN USE indicator On when the handset is in use or when you are registering a handset. Flashes when another telephone is in use on the same line, or when you are deregistering handset(s) from the telephone base.