Event Logging Configuration; Subscreen - Intel PD440FX Product Manual

Event Logging Configuration

Subscreen

This section describes the options in the Event
Logging Configuration subscreen.
Event Log Capacity
Reports whether or not the log is full. There are
no options.
Event Log Count Granularity
Reports the number of log events that must
occur before the event log is updated. There
are no options.
Event Time Granularity
Reports the amount of time (in minutes) that
must pass before the event log is updated.
There are no options.
Event Log Control
Enables or disables event logging. The options
are:
All Events Enabled (default)
l
ECC Events Disabled
l
All Events Disabled
l
Clear Event Log
Clears the event log on the next pass through
POST. The options are:
Keep (default)
l
On Next Boot
l
NOTE
On Next Boot, this option reverts to
the default on the next pass through
POST.
Mark Existing Events as Read
Marks all events already in the log as having
been not read (Do Not Mark) or read (Mark).
The options are:
Do Not Mark (default)
l
M a r k
l
Single Bit ECC Events
When selected, this displays the Single Bit ECC
Events subscreen.
Multiple Bit ECC Events
When selected, this displays the Multiple Bit
ECC Events subscreen.