Reverse Shifting - Jeep 2015 Wrangler Owner's Manual

Hide thumbs Also See for 2015 Wrangler:

Table of Contents

428 STARTING AND OPERATING

Gear Selection

NOTE: Vehicle speeds shown in the chart above are for

2H and 4H only, vehicle speeds in 4L would be signifi-

cantly less.

Reverse Shifting

To shift into REVERSE, bring the vehicle to a complete

stop. Press the clutch and pause briefly to allow the gear

train to stop rotating. Beginning from the NEUTRAL

position, move the shift lever in one quick, smooth

motion straight across and into the REVERSE area (the

Manual Transmission Downshift Speeds in MPH (KM/H)

driver will feel a firm "click" as the shifter passes the

"knock-over"). Complete the shift by pulling the shift

lever into REVERSE.

The "knock-over" provides a resistance to the driver

from accidentally entering the REVERSE shift area and

warns the driver that they are about to shift the trans-

mission into REVERSE. Due to this feature, a slow shift to

REVERSE can be perceived as a high shift effort.

I n f o r ma t i o n P r o v i d e d b y :

Table of Contents