Jeep 2015 Wrangler Owner's Manual page 133

send. The Uconnect® Phone will then send the corre-
sponding phone number associated with the phone-
book entry, as tones over the phone.
NOTE:
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In – Overriding Prompts
The "Voice Command" button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "Would you like to pair a phone, clear a...," you
could push the button and say, "Pair a Phone" to
select that option without having to listen to the rest of
the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
Turning Confirmation Prompts On/Off
Turning confirmation prompts off will stop the system
from confirming your choices (e.g., the Uconnect® Phone
will not repeat a phone number before you dial it).
• Push the button to begin.
• After the "Ready" prompt and the following beep, say:
• "Setup Confirmations Prompts On"
• "Setup Confirmations Prompts Off"
Phone And Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your mobile phone, the Uconnect® Phone will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using Uconnect® Phone. The status is given for roaming,
network signal strength, phone battery strength, etc.
I n f o r ma t i o n P r o v i d e d b y :
3