Jeep 2015 Wrangler Owner's Manual page 283

9. Open the header latches and engage the hook on each
side onto the windshield loops (do not close the
latches).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281
10. If the swing gate brackets were removed, install them
by hooking the rear edge of the bracket on the
interior side of the body channel. Then, rotate it
rearward and over the channel until it snaps onto the
exterior part of the rail. To be properly located, the
bracket must only be clipped to the shortened rail
edge.
I n f o r ma t i o n P r o v i d e d b y :
3