Raising The Windshield And Replacing Side Bars - Jeep 2015 Wrangler Owner's Manual

Hide thumbs Also See for 2015 Wrangler:

Table of Contents

296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Raising The Windshield And Replacing Side Bars

1. Raise the windshield.

2. Loosely attach the rear of the side bar to the sport bar.

Refer to Step 4 of "Lowering Windshield And Remov-

ing Side Bars" earlier in this section.

• Reattach the sport bar Velcro® covering.

3. Attach the front of the side bar to the windshield

• Install the top two hex bolts (13 mm) first, then the

lower side hex bolt (13 mm). The lower side bolt will

not align until the top two bolts are installed.

4. Tighten all side bar attachment bolts.

I n f o r ma t i o n P r o v i d e d b y :

Table of Contents