Jeep 2015 Wrangler Owner's Manual page 36

34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Door Removal Warning Label
1. Roll down the glass window to prevent any damage.
2. Remove the hinge pin screws from the upper and lower
outside hinges (using a #T50 Torx® head driver).
NOTE: The hinge pin screws and nuts can be stowed in
the rear cargo tray located under the rear loadfloor.
3. Unplug the wiring harness connector under the instru-
ment panel by pushing the tab at the base of the
connector and pulling down to disconnect.
I n f o r ma t i o n P r o v i d e d b y :
Hinge Pin Screw