Maintenance And Cleaning; Enamelled Parts; Door Glass; Outer Oven Structure - Smeg SE1055MF Instruction Manual

GB

7. Maintenance and cleaning

7.1 E
Wait for the oven to cool, take out all the removable parts and proceed
to wash with water and regular detergent.
Dry and replace components.
7.2 D
Always keep this clean. Use absorbent kitchen paper. In the case of
persistent dirt, wash with damp sponge and regular detergent.
7.3 O
Wash with water and regular detergent.
7.4 P
Pyrolysis is an automatic high-temperature cleaning method which
causes dirt to dissolve.
IMPORTANT : BEFORE STARTING THE AUTOMATIC CLEANING CYCLE, MAKE SURE THE
OVEN IS EMPTY AND DOES NOT CONTAIN FOOD OR ANYTHING ELSE.
A DOOR LOCK DEVICE PREVENTS THE DOOR BEING OPENED.
IN CASE THE OVEN IS INSTALLED UNDER A COOKTOP, MAKE SURE THAT
DURING THE AUTOMATIC CLEANING CYCLE ANY GAS OR ELECTRIC HOBS
ARE TURNED OFF.
7.4.1 Before starting the automatic cleaning cycle
The Pyrolysis process can be performed at any time of the day or night
(to take advantage of lower night-time electricity rates).
46
Maintenance and cleaning
NAMELLED PARTS
For cleaning enamelled parts, never use abrasive products,
metal wire sponges or sharp objects so as not to damage
the surface.
Remove any dried remains of food on surfaces with a
wooden or plastic utensil.
OOR GLASS
UTER OVEN STRUCTURE
:
YROLYSIS AUTOMATIC OVEN CLEANING