Smeg SFA390X Instruction Manual page 20

Setting the time
On the first use, or after a power failure,
will be flashing on the appliance's
display. To be able to start any cooking
function, the current time must be set.
Turn the temperature knob right or left to
reduce or increase the displayed time.
Keep it in the turned position to reduce or
increase more rapidly.
It may become necessary to
change the current time, for
example for daylight saving time.
From the stand-by position, keep
the temperature knob turned to the
right or left until the value changes.
It is not possible to change the time
if the oven is ON.
20
Use
Cooking functions
To select a cooking function, turn the
function selection knob right or left. The
oven will start cooking at the pre-set
temperature. Cooking itself is preceded by
a preheating stage, which allows the oven
to heat to the cooking temperature more
quickly. Temperature reached
stage is in progress. When the preheating
stage is over,
steadily and a buzzer will sound to indicate
that the food can be placed inside the
oven.
Cooking can be interrupted at any
time by turning the function knob to
0.
Modifying the preset temperature
The preset temperature for each function
can be changed to suit the user's
requirements. At any time while cooking is in
progress, press and turn the temperature
knob right or left to increase or decrease
the cooking temperature by 5 degrees at a
time. Keep the knob turned to produce a
faster increase or decrease.
flashes to indicate that this
will remain lit