Rack Mounting Handle Detachment; Selecting A Location - Icom ic-7700 Instruction Manual

■ Rack mounting handle detachment

FH: Flat head
q
PH: Pan head
w

■ Selecting a location

FH M4 × 9 mm
FH M4 × 15 mm
PH M4 × 8 mm
INSTALLATION AND CONNECTIONS
The rack mounting handles are supplied attached to
the transceiver to stabilize the transceiver in the shock
absorber material in the box. If you want to remove
them, use the supplied screws as described below.
q Remove the six screws from the rack mounting
handles on both side and remove the rack mount-
ing handles.
w Tighten the supplied six screws (PH M4×8) on both
sides of the front panel and side panel.
✔ When re-packing and shipping the transceiver:
Attach the rack mounting handles using original
screws when re-packing and shipping the transceiver
at any time.
Select a location for the transceiver that allows ad-
equate air circulation, free from extreme heat, cold,
or vibrations, and away from TV sets, TV antenna ele-
ments, radios and other electromagnetic sources.
The base of the transceiver has adjustable feet for
desktop use. Set the feet to one of two angles de-
pending on your operating preference.
2-3
2