How To Update Studiolive Rm Mixer Firmware - PRESONUS RM32AI Owner's Manual

3 Networking the RM-series Mixer
3.8

How to Update StudioLive RM Mixer Firmware

3.8 How to Update StudioLive RM Mixer Firmware
4. Enter the password when prompted and tap Join.
Important: You must connect your computer and iOS devices to
the same network as your RM-series mixer each time you want
to control it remotely using UC Surface or QMix-AI.
Please be sure to review all instructions before updating your
StudioLive RM-series mixer.
Your StudioLive RM-series mixer can be updated by simply connecting
a USB flash ("thumb") drive loaded with the firmware files.
All registered StudioLive AI mixers with firmware version 5651 or later have the
ability to connect to a My PreSonus account and download firmware updates
over the Internet. To check online for new firmware updates, simply connect your
registered mixer to a network that has Internet access—without the USB flash
drive inserted—then follow the instructions in steps 8 through 10 below. When
you press Recall when no USB thumb drive is present, the mixer will automatically
attempt to check for new firmware. If newer firmware is available, the mixer
will automatically download and install it with no further action necessary.
If using StudioLive AI mixer remote-control apps for Mac, PC, and iOS
devices, please see our Compatible Routers list
on wireless routers. If you are still running into problems, we suggest
running the firmware update using the USB thumb drive, as certain ISP
routers and network conditions can interfere with online updates.
It is highly suggested that, when doing firmware updates or firmware recovery using
USB flash drives, you use a SanDisk flash drive. If you have compatibility problems
with a SanDisk Cruzer-series flash drive,
StudioLive™ RM-Series Mixers
for more information
please read this Knowledge Base
Owner's Manual
article.
24