PRESONUS RM32AI Owner's Manual page 56

5 RM Mixer Reference
5.1 Front Panel
Phones section
Meters/+48V button: Switches the front-panel meter LEDs between displaying
signals at channel inputs and indicating which channels have +48V phantom
power enabled.
For more information, see 4.7 Metering.
Level/+48V meters: In normal operation, the Meters/+48V button
is not lit, and the meters indicate signals appearing at the RM
mixer's channel inputs, with the color indicating status:
• Green = signal present
• Red = overload (clipping)
When the Meters/+48V button is lit, the meters indicate which
channels have +48V phantom power enabled:
• Yellow LEDs indicate channels with phantom power enabled.
• LEDs that are "off" indicate channels with phantom power disabled.
For more information, see 4.7 Metering.
Mute All button: Pressing this button mutes all inputs and mixes. Press a second
time to return mutes to their state before the button was pressed. This button is
linked with the Mute All button in the Global Settings view of UC Surface software.
For more information, see 4.6 Muting All Inputs.
Phones jack: A stereo ¼" TRS jack for driving headphones.
Phones level: Provides independent control of the phones output level.
Phones source select buttons: These buttons switch the headphones
source between the Main mix (the Main button is lit) and the
Cue source (the Cue button is lit). Only one of these buttons can
be selected at a time; selecting one deselects the other.
Cue button: Routes the source selected in the Global
Settings>Device Settings>System>Cue Source field to the
headphones output. The Solo bus is the default cue source.
Pressing and holding the Cue button while the Main button is selected substitutes
the cue source for the Main mix in the phones until the button is released.
Main button: Routes the Main mix to the headphone output.
For more information, see Connecting Headphones.
StudioLive™ RM-Series Mixers
Owner's Manual
52