How To Select User Channels For Ssb Mode; Log File; How To Open A Log File - Furuno FS-1575 Operator's Manual

6.2.6

How to select user channels for SSB mode

Rotate the ENTER knob to select the user channel desired on the [USER CH] list then
press the 8 key. The RT screen for the selected user channel appears.
6.3

Log File

Three log file modes are provided for storage of calls:
• [RX GENERAL] (received ordinary log)
• [RX DISTRESS] (received distress log)
• [TX] (transmitted log)
Each mode stores 50 calls. The latest call is saved as log no.1 and the log no. of all
previous calls in that log increments by one. When the storage capacity is exceeded,
the oldest call is deleted to make a room for the latest. The icon (
calls. Received distress calls are automatically deleted after 48 hours.
6.3.1

How to open a log file

The procedure to open a log is common to all logs.
1. Rotate the ENTER knob to select [LOG] on the [MENU] screen then push the
knob.
2. Press the 6 key to switch the log file mode in the sequence of [RX DISTRESS] →
[RX GENERAL] → [TX] → [RX DISTRESS] → ...
Press
the 8
key.
8
9
10
11
12
13
14
6. MENU OPERATION
30
2 / 5
LIST
) indicates unread
Mode
6-5