Encoding Setting - Furuno FS-1575 Operator's Manual

7. NBDP SYSTEM OVERVIEW
Note 3: The carriage-return and line-feed codes "CR LF" are automatically sent with
pressing the Enter key during NBDP communication. Press the ← or ↓ key if you want
to send only "CR" or "LF".
Note 4: "Letter Shift" and "Figure Shift" are automatically inserted if necessary. If you
want to send them purposely, press the following keys:
• "Letter Shift": Ctrl + Shift + L
• "Figure Shift": Ctrl + Shift + F
• "NOINF" ("Cyrillic Shift" in Russian mode): Ctrl + Shift + R
Note 5: Do not connect or disconnect the keyboard during operating the terminal unit.
7.3

Encoding Setting

If changing the encoding setting, you can assign a specific key to a local character
code. Contact your dealer about changing of the encoding setting.
Encoding setting
Normal (default)
Norway
Sweden
UK
*1: The appearance of "
*2: To send the character "
instead of Shift + 2.
*3: To send the character "
instead of Shift + 5.
7-4
" [ " key
–
*2
" is not case-sensitive.
" in UK encoding setting, press the " [ " key assigned "
" in UK encoding setting, press the " ] " key assigned "
" ] " key
"
–
*3
" key
–
*1
"
"