TRENDnet User's Guide
Rear View
AC Power Connector – Connect the AC power cord to the connector and
the other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
Package Contents
TPE-4840WS package includes:
•
TPE-4840WS
•
Multi-Language Quick Installation Guide
•
CD-ROM (Utility and User's Guide)
•
Power cord (1.8 m / 6 ft.)
Rack mount hardware
•
If any package content is missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
© Copyright 2015 TRENDnet. All Rights Reserved.
Switch Installation
Desktop Hardware Installation
The site where you install the switch stack may greatly affect its
performance. When installing, consider the following pointers:
Note: The model showing in illustrations may be different to the one you have.
Install the Switch in a fairly cool and dry place.
Install the Switch in a site free from strong electromagnetic field
generators (such as motors), vibration, dust, and direct exposure
to sunlight.
Leave at least 10cm of space at the front and rear of the hub for
ventilation.
Install the Switch on a sturdy, level surface that can support its
weight, or in an EIA standard-size equipment rack.
information on rack installation, see the next section, Rack
Mounting.
When installing the Switch on a level surface, attach the rubber
feet to the bottom of each device. The rubber feet cushion the hub
and protect the hub case from scratching.
TPE-4840WS
For
5