Table of Contents
Advertisement
TRENDnet User's Guide
RMON
The RMON (Remote MONitoring) MIB is used with SNMP applications to
monitor the operations of network devices. The Switch supports the four
RMON MIB groups listed here:
Statistic group: This group is used to view port statistics
remotely with SNMP programs.
History group: This group is used to collect histories of port
statistics to identify traffic trends or patterns.
Event group: This group is used with alarms to define the actions
of the switch when packet statistic thresholds are crossed.
Alarm group: This group is used to create alarms that trigger
event log messages or SNMP traps when statistics thresholds are
exceeded.
You can use your SNMP Network Management System (NMS) software
and the RMON section of the MIB tree to view the RMON statistics, history
and alarms associated with specific ports. Since RMON uses the SNMP
agent for communicating with your NMS software, the SNMP Agent must
be enabled and the SNMP feature must be configured on your switch.
Since RMON works in conjunction with the SNMP agent, the SNMP agent
must be enabled for the RMON feature to be active.
© Copyright 2015 TRENDnet. All Rights Reserved.
Enable RMON
RMON > Global Settings
This section allows you to enable or disable RMON functionality.
Click the RMON Status drop-down list and select Enabled to enable
RMON. Click Apply to save settings.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
77
Advertisement
Table of Contents
