Table of Contents
Advertisement
TRENDnet User's Guide
Rack Mount Hardware Installation
The switch can be mounted in an EIA standard-size, 19-inch rack, which
can be placed in a wiring closet with other equipment. Attach the
mounting brackets at the switch's front panel (one on each side), and
secure them with the provided screws.
Note: The switch model may be different than the one shown in the example
illustrations.
Then, use screws provided with the equipment rack to mount each switch
in the rack.
© Copyright 2015 TRENDnet. All Rights Reserved.
Basic Installation
1. Power on your TPE-4840WS and connect your computer to the switch.
2. Assign a static IP address to your computer's network adapter in the
subnet of 192.168.10.x (e.g. 192.168.10.25) and a subnet mask of
255.255.255.0.
TPE-4840WS
6
Advertisement
Table of Contents
