TRENDnet TPE-103I Specifications

FEATURES
• IEEE 802.3af PoE compliant
• 10/100Mbps Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328ft)
• 1 x 10/100Mbps Auto-MDIX Data In port
• 1 x 10/100Mbps PoE Auto-MDIX Data Out port
• Power port
• Power LED indicator
• Supplies power up to 15.4 Watts
• Easily install a PoE device where a power outlet is not available
• Reduce installation and network equipment costs
• Safeguards network devices with short circuit protection
• Plug and Play in remote location
• Light weight and compact size
• Wall mounting points
• 3-year limited warranty
Power over Ethernet (PoE) Injector
TPE-103I (v1.0R)
The Power over Ethernet Injector, model TPE-103I, combines
electrical power with a Fast Ethernet network connection to produce a
Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet
cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a
non-PoE switch to save installation and equipment costs when
installing TRENDnet PoE access points and IP cameras in remote
locations. This compact device safeguards valuable network
equipment with short circuit protection. Quickly create an integrated
PoE and non-PoE network.
TPE-103I
rev: 12.21.2011