Table of Contents
Advertisement
TRENDnet User's Guide
System
System Management
System > System Management
This section explains how to assign a name, location, and contact
information for the switch. This information helps in identifying each
specific switch among other switches in the same local area network.
Entering this information is optional.
Management
System
The model number of this Smart Switch.
Description:
System Object
Indicates the unique SNMP MIB object identifier
ID:
that identifies the switch model. You cannot change
this ID number.
System Name: Specifies a name for the switch, the name is optional
and may contain up to 15 characters.
System
Specifies the location of the switch. The location is
Location:
optional and may contain up to 30 characters.
System
Specifies the name of the network administrator
Contact:
responsible for managing the switch. This contact
name is optional and may contain up to 30
characters.
© Copyright 2015 TRENDnet. All Rights Reserved.
Click Apply to apply the change to the switch
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
11
Advertisement
Table of Contents
