Printing A Status Sheet; Operational Problems; The Ready Light Does Not Turn On; The Printer Does Not Print (Ready Light Off) - Epson Aculaser C2800 Series User Manual

Printing a Status Sheet

To confirm the current status of the printer, and that the options are installed correctly, print a
status sheet using the printer's control panel or the printer driver.
To print a status sheet from the printer's control panel, see "Printing a Status Sheet" on page 184.
To print a status sheet from the Windows printer driver, see "Printing a status sheet" on page 72.
You cannot print the status sheet from Macintosh.

Operational Problems

The Ready light does not turn on

Cause
The power cord may not be properly plugged into
the electrical outlet.
The electrical outlet may be controlled by an
outside switch or an automatic timer.

The printer does not print (Ready light off)

Cause
The printer is offline.
Some error may have occurred.

The Ready light is on but nothing prints

Cause
Your computer may not be properly connected to
the printer.
The interface cable may not be plugged in securely.
You may not be using the correct interface cable.
Downloaded from ManualsPrinter.com Manuals
AcuLaser C2800 Series
What to do
Turn off the printer, check the power cord connections between
the printer and the electrical outlet, then turn the printer back on.
Make sure that the switch is turned on or plug another electrical
device into the outlet to check whether the outlet is operating
properly.
What to do
Press the N Start/Stop button once to switch the printer to
ready status.
Check the LCD panel to see if an error message appears.
What to do
Perform the procedure illustrated in the Setup Guide.
Check both ends of the interface cable between the printer
and the computer.
If you are using the USB interface, use a Revision 2.0 cable.
User's Guide
Troubleshooting 237