Printable Area - Epson Aculaser C2800 Series User Manual

❏ Media meant for other color laser printers, black-and-white laser printers, color copiers,
black-and-white copiers, or ink jet printers
❏ Previously printed paper by any other color laser printers, black-and-white laser printers, color
copiers, black-and-white copiers, ink jet printers, or thermal transfer printers
❏ Carbon paper, carbonless paper, thermal-sensitive paper, pressure-sensitive paper, acid paper,
or paper that uses high-temperature-sensitive ink (around 190 °C)
❏ Labels that peel easily or labels that do not cover the backing sheet completely
❏ Coated paper or special surface-colored paper
❏ Paper that has binder holes or is perforated
❏ Paper that has glue, staples, paper clips, or tape on it
❏ Paper that attracts static electricity
❏ Moist or damp paper
❏ Paper of uneven thickness
❏ Overly thick or thin paper
❏ Paper that is too smooth or too rough
❏ Paper that is different on the front and back
❏ Paper that is folded, curled, wavy, or torn
❏ Paper of irregular shape, or paper that does not have right angle corners

Printable area

4-mm minimum margin on all sides. (The printable width should be 207.9 mm or less.)
Note:
❏ The printable area varies, depending on the emulation mode in use.
❏ When using ESC/Page language, there is 5-mm minimum margin on all sides.
❏ The print quality may be irregular depending on the paper you use. Print on one or two sheets of paper
to check the print quality.
Downloaded from ManualsPrinter.com Manuals
AcuLaser C2800 Series
Technical Specifications
User's Guide
263