The non-printed side of the page is dirty
Cause
Toner may have spilled onto the paper feed path.
Memory Problems
Print quality decreased
Cause
The printer cannot print in the required quality level
because of insufficient memory, and the printer
lowers the quality automatically so that the printer
can continue printing.
Insufficient memory for current task
Cause
The printer has insufficient memory for current task.
Insufficient memory to print all copies
Cause
The printer does not have sufficient memory to
collate print jobs.
Downloaded from ManualsPrinter.com Manuals
AcuLaser C2800 Series
What to do
Clean internal printer components by printing three pages
with only one character per page.
What to do
Check to see if the printout is acceptable. If not, add more
memory for a permanent solution or lower print quality
temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this
setting to Off.
What to do
Add more memory for a permanent solution or lower print
quality temporarily in the printer driver.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this
setting to Off.
What to do
Only one set of copies will be printed. Reduce the contents of
print jobs, or add more memory. For information on installing
more memory, see "Memory Module" on page 196.
If RAM Disk is set to Maximum or Normal on the control panel, you
can increase the available memory space by changing this
setting to Off.
User's Guide
Troubleshooting
245