Sony F65 Operation Manual page 19

Part number
4-260-711-63
4-260-711-73
4-260-711-83
To change a shim
Note
Exercise care not to damage the internal wiring of the
camera when changing the shim. Modifying a shim,
scratching a surface, or introducing dust can change the
flange back distance and damage the camera such that it
cannot be restored to original condition, just as for a film
camera.
1
Remove the lens mount screws (6).
Lens mount screws
2
Pull the lens mount out by about 10 mm (
and remove the shim carefully.
Pass the shim slit over the wiring, taking care not to
pull the wiring, when removing the shim.
Note
Pulling the lens mount out by more than 20 mm
3
( / inch) risks damage to the internal wiring.
4
Thickness
0.08 mm (0.0032 inch)
0.09 mm (0.0036 inch)
0.10 mm (0.0040 inch)
13
/ inch)
32
3
Insert the replacement shim using the shim slit to clear
the wiring, and align the camera screw holes and shim
alignment pins.
Shim alignment pins
4
Reattach the lens mount in its original position, and
fasten the screws to a torque of 0.53 N·m (0.39 lbf).
19
Attaching a Lens