Chapter 2 Installation And Preparations; Mounting The Sr-R4 - Sony F65 Operation Manual

Digital motion picture camera

Hide thumbs Also See for F65:

Table of Contents

Installation and

Preparations

The SR-R4 docks on the rear of the camera head.

For details about mounting the SR-R4, refer to the

Operation Manual of the SR-R4.

Notes

• Always turn off the camera power supply when

mounting the SR-R4.

• The recorder connector for connecting the SR-R4 is an

optical connector. Attach the connector cap on the

optical connector when not connected to an SR-R4 to

protect the connector. After removing the cap, store it in

the position shown in the following figure for

safekeeping.

Mounting the SR-R4

SR-R4

Chapter

• When mounting the SR-R4, fix the camera head on a

tripod in advance to keep the camera head stable.

For tripod mounting, see "2-5 Mounting the Camera on

a Tripod" (page 21).

• When the camera is used with the SR-R4 docked, make

sure that the camera is securely fixed and stable so that it

will not fall over.

Table of Contents