Auto Install Process; Idle Screens - Mitel 6863i User Manual

Getting Started
The 6863i phone then checks settings and looks for new configuration and firmware updates from a server. If a new
update is found, the phone displays the message Updating Configuration. This may take a few moments while the
phone downloads the latest updates.
Note:
New updates to your phone can be automatically scheduled from the server. This is set up on the phone system by your
System Administrator and should be scheduled during non-business hours or slow call periods.
Important!
Do not unplug or remove power to the phone while it is checking or installing firmware and configuration information.
When the configuration update is complete, the phone displays the following screens:

Auto Install Process

If your System Administrator uses the Auto Install application, you will be prompted to enter and confirm the Device ID
after the initial startup screens display. A configuration file is then created, and the phone restarts.

Idle Screens

When the phone has successfully updated the configuration and connected to the network, the phone displays the idle
state screen:
4
Updating
configuration
Checking for new
firmware
Network
DSP
SIP
Done
L1 John Smith
9055550055
Tue Aug 20 2:55pm
6863i User Guide for Clearspan – 2895-001 – October 2014