Icom IC-F61M Instruction Manual page 29

e Release [PTT] to receive.
• The RX voice message is recorded.
r Push [Playback/Rec] again to stop recording.
• " " stops blinking.
• The recording operation automatically stops after the following: the
recording memory is full, pushing any key but [PTT], or transmit-
ting a single tone.
Playing back:
The recorded voice messages are played back with [Playback] or
[Playback/Rec].
• " " appears on the function display when an unread message is in
the recording memory.
➥ Push [Playback]/[Playback/Rec] to playback the recorded mes-
sage in sequence starting with the latest one.
• Push [CH Up] or [CH Down] to select the desired message.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• During playback mode, "
played back, or "
played back.
• " " disappears after playing back an unread message for the
specific time period.
• If you push [PTT] while playing back the message, the transceiver
stops playing back, and then starts to transmit.
Deleting the message:
➥ While playing back the message, push and hold [Playback]/
[Playback/Rec] for 1 sec. to delete the playing back message.
➥ While pushing and holding [P0] and [CH Up], turn power ON to
delete all messages in the recording memory.
" appears when an unread message is
" disappears when the played message is
BASIC OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22