Fax TX Active Screen Display
PRE-REqUISITES
•
APPLICATION
Customer wants to modify the Fax TX active screen
setting to display that a fax is being sent . User will be
able to check destination and document information on this screen . Customer
also wants to adjust the Fax RX active screen setting to indicate that a fax is being
received . When this screen
is displayed, the user can
check sender and fax
reception information .
1 . Touch Utility .
2 . Touch User Settings .
3 . Touch Custom Display Settings .
4 . Touch Fax Active Screen .
5 . Touch TX Display .
6 . Touch Yes under Job Setting Menus .
7 . Touch RX Display .
8 . Touch Yes under Job Setting Menus .
9 . Touch OK .
10 . Touch Close 3x to return to Main Menu .
32
.
Fax TX Display and Fax RX Display default is "NO".
Information regarding the fax transmission and fax
reception is not displayed unless this settings for both
fax modes is changes to YES.
If not on the home screen,
touch the Menu key on
the Control Panel
.