Muratec MFX-C2280 Feature Overview Manual page 22

10 . Touch Individual Sender Line Set Up .
11 . Select ON from Job Setting Menu .
12 . Touch OK .
13 . Touch Function Settings .
14 . Touch Forward TX Setting .
15 . Touch Fax Line 1 .
16 . Touch Yes to enable the Fax Forwarding feature .
17 . Select Forward & Print (If TX Fails) as the Output Method .
Forward & Print (If TX Fails) will forward the incoming fax to the selected
destination and ONLY print the reception should the forwarding operation
fail (i.e. forwarding destination is an Email address and the network is down.
Forward & Print will forward the incoming fax to the selected destination
and print it. This is for users that need and electronic copy as well as a hard
copy of every fax that is received.
18 . Touch Select Line .
19 . Touch Line 1 as the forwarding line .
20 . Touch Forward Dest. and then touch Select From Address Book and select
the Email address destination (destination must be pre-registered) .
21 . Touch OK 2x .
22 . Touch Fax Line 2 .
The selected destination will appear in the Forward Dest. Field for Line 1.
23 . Touch Yes to enable the Fax Forwarding feature .
24 . Select Forward & Print as the Output Method .
25 . Touch Select Line .
20