Muratec MFX-C2700 Configuration Manual page 19

18. Select the user added in step
then click OK.
19. Close the folder's property dialog box.
NOTE
Create a profile to complete the setup for Scan To Network PC. Refer to
"Creating a profile for scan to network PC" on page
Windows Server 2003
1. Click Start > Administrative Tools > Server Management.
2. Click Users.
3. Select Add a user.
4. Enter the user name (C-2) in the First name text box and then click Next.
5. Enter the password (C-3) in Password and Confirm password.
6. Select the Cannot change password and then click Next.
7. Click Finish.
8. Click Close.
9. Create a new folder on the computer with the shared folder name entered in C-5.
NOTE
It is recommended that you create a folder in the local drive, not on the
desktop or "My Documents".
10. Right-click the folder created in step 9, and then select Sharing and Security.
11. On the Sharing tab, select Share this folder and then click Permissions.
12. Click Add.
13. Enter the user name (C-2) and then click Check Names.
14. Check that the user name (C-2) is displayed, and then click OK.
15. Select the Allow check box for Full Control, and then click OK.
13 and select the Allow check box for Full Control,
Configuring the network settings > 19
22.