Setting The Dial Mode; Setting The Flash Time; Setting The Area Code; Registration - Motorola M802C User Manual

NOTE
During an external call, pressing
and setup a conference call.
4.15

Setting the dial mode

The default-dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU to select DIAL MODE.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily
when dialing out. After the call is ended, the dial mode will change back to pulse
automatically.
4.16

Setting the flash time

The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want.
(8 options are available: 90, 100, 110, 250, 300, 400,
4. Press MENU to save the setting.
4.17

Setting the area code

1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
4.18

Registration

4.18.1

Registering a cordless handset

To register additional cordless handsets,
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select REGISTRATION.
3. Press MENU and then VOL+ or REDIAL/VOL- to select
Using the cordless phone
or SPEAKER on any cordless handset will join in the call
600 and 700MS)
SETUP BS.
TONE or PULSE.
SETUP BS.
FLASH TIME.
SETUP BS.
AREA CODE.
SETUP HS.
YES or NO.
35