Redial; Redial List; Dial Mode; Recall Mode - Motorola CT310 User Manual

3.3

Redial

The last entry dialled is stored in the phone; this can be up to 32 digits long.
1. Pick up the handset and press
Or:
2. Press and then
3. Once the call is answered lift the handset to talk.
3.4

Redial list

At least the last 8 entries dialled are stored in the phone, the numbers can be up to 16
digits long.
To dial a number from the Redial list
1. Press .
2. Keep pressing
3. Press and hold
4. Lift the handset or press
3.5

Dial mode

Your phone is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PABX which requires pulse dialling.
1. Press and hold
3.6

Recall mode

Recall is useful to access certain network services and PABX /switchboard services. Your
CT310 has 2 recall buttons
NOTE
R1 Short flash is 100ms / R2 Long Flash is 600ms.
Flash keys are used to refresh a dial tone. When on an external call, press R2 to access
a Call Waiting Line when a call waiting prompt signal is heard. Press again to toggle
between the two calls.
For more information about network services contact your network operator.
3.7

Turn anti-dialling from an extension on / off

On some PABX's you can set the CT310 to cause interference on the line so another
extention cannot be used.
1. Press and hold
Using the phone
.
.
to scroll to the entry you want.
button for 3 seconds to scroll through the numbers quickly.
to dial the displayed entry.
for 3 seconds to change the setting.
is the short flash time and
for 3 seconds to change the setting to
is for long flash time.
"PPP OFF" or PPP O
n
".
11