Recall And Dial Mode; Change Your Dial Mode - Motorola CT2 User Manual

9. Recall and dial mode

Recall is useful to access certain network services and PABX /switchboard services. Your
CT2 has 2 recall buttons
1
NOTE
Short flash is 100ms /
Flash keys are used to refresh a dial tone. When on an external call, press R2 to access
a Call Waiting Line when a call waiting prompt signal is heard. Press again to toggle
between the two calls.
For more information about network services contact your network operator.
Your phone is set to tone dialling. You should only need to change this if connected to an
older type of switchboard / PABX which requires pulse dialling.
m
9.1

Change your dial mode

1. Press , the display shows
u d
m
2. Scroll or
3. Press and the display shows the current setting.
u d
4. Scroll or
D
5. Press to exit.
18
1
is the short flash time and
2
Long Flash is 600ms.
SEt 1 dAtE.
to SEt 5 P_t.
to the change the setting.
2
is for long flash time.
Recall and dial mode