Setting The Dial Mode; Setting The Flash Time; Setting The Area Code; Resetting All Settings - Motorola M802C User Manual

3.15

Setting the dial mode

The default-dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press MENU and then +/- to select SETTINGS.
2. Press MENU and then +/- to select
3. Press MENU and +/- to select
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily
when dialing out. After the call is ended, the dial mode will change back to pulse
automatically.
3.16

Setting the flash time

The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU and then +/- to select SETTINGS.
2. Press MENU and then +/- to select
3. Press MENU and then +/- to the flash time you want. (8 options are available: 90MS,
100MS, 110MS, 250MS, 300MS, 400MS, 600MS, and 700MS)
4. Press MENU to save the setting.
3.17

Setting the area code

1. Press MENU and then +/- to select SETTINGS.
2. Press MENU and then +/- to select
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
3.18

Resetting all settings

1. Press MENU and then +/- to select RESET.
2. Press MENU and then +/- to select
3. Press MENU to select YES. All personalized settings will be reset to default.
NOTE
All of your phonebook entries, call list and redial list will remain unchanged after resetting.
Using your corded base phone
DIAL MODE.
TONE or PULSE.
FLASH TIME.
AREA CODE.
ALL SETTINGS.
25