Listening To Bluetooth Enabled Devices - Sharp HT-SB35D Operation Manual

Bluetooth one touch connection via NFC (continued)
■ NFC connection for audio playback
Check that:
● Your device (smartphone/tablet) has an NFC function.
● NFC function on your device is enabled.
● Screen lock function of the device is off.
● This unit is not in low power consumption mode.
● Your device and NFC tag must be within 30 feet (10 meters) from the unit.
1
Touch your device to the NFC detection area on the main unit or supplied NFC tag. (NFC detection area of
your device must touch to the NFC detection area of the main unit or supplied NFC tag.)
2
A pop-up window asking whether to proceed with the Bluetooth connection appears on the device. Select
<YES>.
● The 'connected' message appears when the connection is complete.
3
Playback will start automatically, otherwise press play (on remote control or source device).
● Sound will be heard from the speakers of this unit via audio streaming.
● Your device and NFC tag must be within 30 feet (10 meters) from the unit.
● To disconnect, simply touch your device to the NFC detection area on the main unit or the NFC tag again.
Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to skip up.
Press the button to skip down.
Notes:
● This product switches to Bluetooth function automati-
cally when NFC tagging was done by your device.
● If your device does not support NFC, or if you wish to
listen to audio via Bluetooth connectivity without NFC
tag; refer "Pairing with other Bluetooth source de-
vices" on the next page.
● Some Bluetooth devices will connect to this product
automatically when the device or its Bluetooth mode
was turned on. In such case, it will also change the
function selection of this product. If you do not want
it to connect automatically, please disable Bluetooth
on your device.

Listening to Bluetooth enabled devices

Bluetooth wireless technology is a short-range radio
technology that enables wireless communication between
various types of digital devices, such as mobile phone or
computer. It operates within a range of about 30 feet (10
meters) without the hassle of having to use cables to con-
nect these devices.
This sound bar supports the following:
Communication System: Bluetooth Specification version
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile)
and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
This unit cannot be used to talk over the telephone even
●
when there is a Bluetooth connection made to a mobile
phone.
Please refer to the operating manual supplied with the
●
mobile phone for details on operation of your mobile
phone while transmitting the sound using a Bluetooth
connection.
NFC
detection
area
Main
unit
Device
or
SOUND BAR HOME THEATRE SYSTEM HT-SB35D
● It takes about 6-8 seconds for a Bluetooth enabled de-
vice (eg. smartphone) to establish Bluetooth connec-
tion with this unit via NFC or manual connection.
● If "Empty tag" or similar message appears on your de-
vice, touch the device again to the NFC detection area
on the main unit or supplied NFC tag.
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
pairing is made with more than 99 devices.
●
Pairing can only be made one device at a time. This
sound bar can be paired to a maximum of 99 devices.
If subsequent device is paired, the oldest device paired,
will be deleted and replaced with the new one.
pairing information is deleted while repairing, etc.
●
Bluetooth connection status
Status
Unconnected
Pairing mode
Connected
However, the indicator status is not displayed during low
power consumption mode.
E-12
NFC tag
INPUT indicator (blue)
Blinks
Blinks quickly
Lights up