Advertisement
Second Security System Operation
If your transmitters have been programmed to a second Marksman security system, follow the
steps below.
For 1-Way Remote Control Transmitter:
1. First press the
button on the transmitter.
2. Once the
button is pressed, the LED on the transmitter will illuminate for 3 seconds to
indicate second vehicle transmitter operation.
3. While the LED is illuminated, press any button on the transmitter to control the second vehicle's
security system or alarm function (arm/disarm/trunk/remote start).
Note: Button functions are the same for the second car as they are for the first car.
For LCD Remote Control Transmitter:
Second Vehicle Operation: While the
can remote control and communicate with a second vehicle security system.
1. Press and hold
and
buttons at the same time until one long beep is heard.
Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the
heard and the
icon is displayed on the LCD screen indicating second car operation.
3. While the
is displayed, press any button on the transmitter to control the second vehicle's
security system or alarm function (arm/disarm/trunk/remote start).
Note: Button functions are the same for the second car as they are for the first car.
Return to First Car Operation (LCD Remote Only)
1. Press and hold
and
heard. Programming Mode has now been entered.
Note: No action for five seconds will generate two long beeps indicating the
Programming Mode has been exited.
2. Within 5 seconds, press and hold the
heard and the
icon is not displayed on the LCD screen indicating first car
operation.
icon is displayed on the LCD screen, you
button until two beeping sounds are
buttons at the same time until one long beep is
button until two beeping sounds are
17
Advertisement
