Advertisement
Timer Starting Mode
Important! Timer Start should be used only in open areas. Never start or leave a vehicle running in
an enclosed area such as a garage or carport.
This unit can be programmed to auto-start and run the engine every 2 or 3 hours (3 hours is the
default setting). The engine will run for the programmed run time and then shut down. This
feature is designed to prevent the engine from freezing in cold climates.
A Maximum of Six Auto-Start Cycles can Occur.
Timer Starting
Enter Timer Start:
1. Press the
button twice to remote start the vehicle.
2. As soon as the parking lights have turned on or are flashing, press the
press and hold the
button. The parking light will flash 3 times, the siren or
horn will chirp 3 times and the
vehicle is now programmed to start every 3 hours.
3. Press the brake pedal to shut off the engine.
Exit Timer Start:
1. Make sure the remote start system is not operating the engine.
2. Turn the ignition "ON". The LED and parking lights will flash 4 times. The horn
chirps 4 times. The vehicle is no longer programmed to Timer Start
automatically.
Or
1. Press the
button twice to remote start the vehicle.
2. As soon as the parking lights have turned on or flashing, press the
and hold the
button. The parking lights will flash 4 times. The siren or horn chirps 4 times.
The vehicle is no longer programmed to Timer Start automatically.
Turn Off Remote Start System
When the engine is running by remote start and you wish to shut it off, follow
these steps:
1. While in Remote Start Mode, press the
transmitter.
2. Move the optional remote start toggle switch to the "OFF" position (if
installed).
3. Press the vehicle's brake pedal, the engine will stop running and the parking
lights will turn off to indicate the engine has been shut off.
Toggle Switch Disable
(If Installed)
The disabling the Remote Start System feature allows your system's remote start unit to be
temporarily disabled, which prevents the vehicle from being remote started accidentally. This is
useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start,
move the optional remote start enable toggle switch to the "OFF" position.
icon will appear on the LCD display. The
button twice on the remote
button once. Then
button once. Then press
15
Advertisement
