Timer Setting - Marksman M12A User Manual

Programming the LCD Transmitter
Vibration/Melody Mode: This mode is useful when you are in a noisy place and it is difficult to hear
the beep from the remote. The LCD transmitter will vibrate if your security system has been
activated.
Press the "SET" button first, within 3 seconds press the
mode of vibrate/melody. The
Set-Up Fixed Count Down Timer:
Press the "SET" button first, then within 3 seconds press and hold the
The LCD screen will show the
desired time.
Out of Range Indication:
1. If the transmitter is within range, the
2. If you are out of range, the
5 times.

Timer Setting

Button
Press and Hold SET
Button for 3 seconds
Press the SET
Button Once
Press the SET
Button Once
Press the SET
Button Once
Press the SET
Button Once
Press the SET
Button Once
Press the SET
Button Once
Press the SET
Button Once
Press and Hold
button for 2 seconds
icon will be displayed on the LCD screen to show mode.
icon and timer (0:10). Press the
icon will display on the LCD screen.
icon will disappear from LCD Screen and transmitter will beep
Description
Time Setting (Hour)
Flash Digit for Adjusting
Time Setting (Min.)
Flash Digit for Adjusting
Alert Alarm Time Setting (Hour) Flash
Digit for Adjusting
Alert Alarm Time Setting (Min.) Flash
Digit for Adjusting
Alert Alarm Setting ON/OFF
Count Down Timer Setting (Hour) Flash
Digit for Adjusting
(Max 19 Hrs. 59 Min.)
Count Down Timer Setting (Min.) Flash
Digit for Adjusting
Count Down Timer Setting ON/OFF
Daily Timer Start Timer Setting
Flash / Icon and hours for Adjusting
( ) button for 2 seconds to select the
button for 2 seconds.
button again to choose the
Operation
for (-) and
for (-) and
for (-) and
for (-) and
for (-) and
for (-) and
for (-) and
for (OFF) and
for (-) and
(+)
(+)
(+)
(+)
(+)
(+)
(+)
(ON)
(+)
17