Replacement Parts; About The Flatbed Scanner Unit 101/Flatbed Scanner Unit 201 - Canon imageFORMULA DR-C240 User Manual

Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-4558
Input AC100 to 240V, 50/60 Hz, 0.3 to 0.53 A
Output DC24V 2.0A
Weight Approximately 0.2kg (0.44 lb) (including power
cord)
Specifications are subject to change without notice due to product
improvements.

Replacement parts

Exchange roller kit (product code: 0697C003)
Kit to replace the rollers (feed roller, retard roller).
• For the replacement procedure,
on p. 72.
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
Option
Barcode module (product code: 1922B001)
2D code module(product code:1922B003)
Add-on module to recognize barcodes printed on documents during
scanning,
Carrier sheet (for passports) (Product code: 0697C002)
This is a carrier sheet for scanning passports.
Flatbed scanner unit101 (product code: 4101B001)
Flatbed scanner unit that can be connected to and used with a DR
scanner. Connecting the unit to this scanner enables you to use this
scanner as a flatbed scanner with an automatic document feeder.
Flatbed scanner unit201 (product code:6240B001)
A flatbed scanner unit that can be used by connecting to a DR scanner
and supports A3 size paper. Connecting the unit to this scanner
enables you to use this scanner as a flatbed scanner with an
automatic document feeder.
see "Replacing Consumable Parts"
About the Flatbed Scanner Unit 101/
Flatbed Scanner Unit 201
The optional Flatbed Scanner Unit 101/201 can be connected to and
used with this scanner.
System requirements
The computer must comply with the necessary system requirements
of Flatbed Scanner Unit 101/201.
The scanner driver of Flatbed Scanner Unit 101/201 needs to be
installed to use the unit.
About Use with CaptureOnTouch
IMPORTANT
Only the Flatbed scanner unit101 can be used with CaptureOnTouch.
About Assigning Function to Start Button
When you connect Flatbed Scanner Unit 101, you can assign
Scanning Shortcut of CaptureOnTouch or any job to the start button
of Flatbed Scanner Unit 101.
Limitation of Full Auto Mode
When a document is scanned with Flatbed Scanner Unit 101, Full
Auto mode of CaptureOnTouch may not function effectively.
Limitation of Restarting with Start Button
When CaptureOnTouch is set not to be resident in memory,
CaptureOnTouch cannot be restarted by pressing the start button on
Flatbed Scanner Unit 101 after you end CaptureOnTouch.
About Setting up the Scanner Driver
When functions of this scanner cannot be selected with the Flatbed
Scanner Unit 101 settings dialog box, click [Option] in the dialog box
to open the scanner driver and make the required settings.
89