Scanning Shortcut - Canon imageFORMULA DR-C240 User Manual

5
To check the scanned image, click the [Finish] button.
see "Operations for the scanned image edit
To edit scan images,
window" on p. 42
Click the [ ] button to edit the output settings.
"Setting the output" (See p. 47)
Click the [Cancel] button to discard the scanned image and return to
the main window.
When the output has finished, a popup window will be displayed. If
saving the scanned image, a link to open the save destination folder
will be displayed.
This completes the Standard Scanning.
Hint
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] link may not be displayed.

Scanning Shortcut

Operations;
Save [Scanning Shortcut] -> Scan the document -> Output the
scanned images By adding scanning shortcuts that combine
frequently-used document selections and outputs, you can scan just
by clicking the Scanning Shortcut panel.
Hint
If a registered scanning shortcut is assigned as a job, you can run
shortcut scans using these settings by pressing the scanner start
button.
"Scanning with Start Button" (See p. 42)
Registering and editing scanning
shortcuts
Multiple scanning shortcuts can be allocated to CaptureOnTouch.
1
Either click the [New shortcut] button in [Scanning
shortcut], or select the document scan and output in
[Standard Scanning], and click the [Save to Shortcut] button.
A scanning shortcut panel will be created.
38