Viessmann VITOCAL 222-S Installation And Service Instructions Manual page 24

Installation sequence
Installing the internal unit
Total weight with filled DHW cylinder
Type AWT-AC
221.A04
221.A07
221.A10
221.A13
Minimum clearances
Note
If using the secondary circuit connection
set (accessories), maintain a wall clear-
ance of approx. 80 mm.
Handling
The cylinder module can be removed
during transport.
24
(cont.)
Weight in kg
364
364
367
367
Minimum room volume (to
DIN EN 378):
Type AWT-AC
221.A04
221.A07
221.A10
221.A13
Minimum room height h
Installation
■ Without pre-assembly/
DHW connection set (ac-
cessories)
■ With pre-assembly/DHW
connection set (accesso-
ries)
Observe engineering informa-
tion
Vitocal technical guide
!
Please note
Avoid damaging the appliance
during handling.
Never put weight on the top, front
or side panels of the appliance.
Minimum room
volume in m 3
2.7
4.9
6.1
6.1
h in mm
2000
2100