Install Drivers Used For Printing For The Wi-Fi Direct Network When Using Vertical Pairing (Windows ® 8 . 1 ) - Dell E310dw User Manual

and Windows 8)
®
Windows Vertical Pairing is a technology that allows your Vertical Pairing-supported wireless machine to connect to
®
your Infrastructure network using the PIN Method of WPS and the Web Services feature. It enables printer driver
installation from the printer icon in the Add a device screen. If you are in Infrastructure mode, you can connect your
machine to the wireless network, and then install the printer driver using this feature.
• Verify that the host computer and the Dell machine are on the same subnet, or that the router is correctly
configured to pass data between the two devices.
• If you have disabled your machine's Web Services feature, you must re-enable it by selecting the Web Services
check box and clicking Submit. The default setting of Web Services for the Dell machine is Enabled. You can
change the Web Services setting using Web Based Management.
• Make sure your wireless LAN access point/router has the Windows
not sure about the compatibility logo, contact your access point/router manufacturer.
• Make sure your computer has the Windows
compatibility logo, contact your computer manufacturer.
• If you are configuring your wireless network using an external wireless Network Interface Card (NIC), make sure
the wireless NIC has the Windows
wireless NIC manufacturer.
• To use a Windows 7 or a Windows
®
See the instructions supplied with your wireless LAN access point/router.
1. Turn on your machine.
2. Set your machine to WPS mode (PIN Method).
3. Do one of the following:
• (Windows 7)
®
Click (Start) > Devices and Printers > Add a device.
• (Windows 8)
®
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
4. Select your machine and type the PIN.
5. Select the infrastructure network to which you want to connect, and then click Next.
6. When your machine appears in the Devices and Printers dialog box, the wireless configuration and the printer
driver installation are successfully completed.
Install Drivers Used for Printing for the Wi-Fi Direct Network When Using Vertical Pairing
(Windows 8.1)
®
Windows 8.1 allows your Vertical Pairing-supported wireless machine to connect to the Wi-Fi Direct network using
®
the one-push or PIN Method of WPS and the Web Services feature. It enables printer driver installation from the
printer icon in the Add a device screen. You can connect your machine to the Wi-Fi Direct network, and then install
7 or Windows 8 compatibility logo. If you are not sure about the
® ®
7 or Windows 8 compatibility logo. For more information, contact your
® ®
8 computer as a Registrar, you must register it to your network in advance.
®
7 or Windows 8 compatibility logo. If you are
® ®
Network 105